How to Maintain Your Window Film & Keep Them Looking Fresh

1. Wait Before Cleaning Newly Tinted Windows

After installation, your film needs time to cure. Cleaning too soon can cause damage.

✔ Do: Wait 5-7 days before rolling down windows or cleaning the film.
❌ Don’t: Use water or cleaners on fresh tints, as they need time to fully adhere.

Tip: Some small water bubbles may appear during curing—this is normal and will disappear as the film dries.

2. Use the Right Cleaning Products

Standard glass cleaners often contain ammonia, which can damage and discolor window films.

✔ Do: Use ammonia-free glass cleaners or a mix of mild soap and water.
✔ Do: Use a microfiber cloth or soft sponge to prevent scratches.
❌ Don’t: Use harsh chemicals, abrasive cloths, or newspaper.

Did You Know? LLumar window films have scratch-resistant coatings, but improper cleaning can still cause damage over time.

3. Avoid Sharp Objects & Harsh Scrubbing

Even high-quality tints can be scratched or punctured if handled roughly.

✔ Do: Wipe gently with a soft cloth or rubber squeegee.
✔ Do: Be mindful of pets or objects that may scratch the window film.
❌ Don’t: Use blades, scouring pads, or hard-bristled brushes.

4. Protect Your Tint from Sun Damage & Fading

Although LLumar films are designed to resist fading, prolonged exposure to extreme heat can affect longevity.

✔ Do: Park in shaded areas or use a sunshade to reduce exposure.
✔ Do: Keep your car interior clean, as dust buildup can attract heat.
❌ Don’t: Use DIY tints, which fade much faster than professionally installed high qulity films.

5. Be Mindful When Rolling Down Windows

Improper use of windows can cause tint peeling and lifting, especially near the edges.

✔ Do: Wait at least a week after installation before rolling down windows.
✔ Do: Open windows gently and avoid pressing directly on the film.
❌ Don’t: Use excessive force when rolling windows up or down.

Common Window Film Issues & How to Fix Them

1. Bubbles in the Tint

• Cause: Air or moisture trapped under the film during curing.
• Solution: Most bubbles disappear after 1-2 weeks. If they persist, professional reapplication may be needed.

2. Peeling or Lifting Edges

• Cause: Rolling windows down too soon, poor-quality tint, or improper installation.
• Solution: Avoid touching the edges—if peeling worsens, seek professional tint repair.

3. Tint Turning Purple or Fading

• Cause: Cheap window film without UV resistance degrade over time.
• Solution: LLumar window films are fade-resistant, but if you have DIY tints, consider a professional upgrade.